AnglerIndustries MIRAGE
Spray & Soak Cleaner

request quote

CONTACT US

main page

Mirage is a mildly alkaline, low foaming liquid cleaner in applications as either a spray or soak cleaner for all metals. Mirage is a silicate, borate and phosphate free product. The operating pH of a Mirage solution is less than 10.5. Mirage was formulated to remove the drawing/forming lubricants that are encountered in drawing and heading steel and aluminum.

Operating Parameters- Spray Cleaning
Mirage may be used in any Industrial Washer that used in plants.
Concentration: 2 to 7% (vol)
Operating Temperature: 140°-170°F
Spray Time: 1 to 5 minutes (depending upon soil load)
Spray Pressures: higher pressures improve cleaning.

Operating Parameters – Soak Cleaning
Concentration: 5 to 10% (vol)
Operating Temperature: 150°-190°F
Immersion Time: 3 to 8 minutes

Agitation: Suggested. Because of Mirage’s low foaming characteristics, work or solution agitation is beneficial in the cleaning operation.
Ventilation: Suggested
Equipment: Mild steel tanks and heating coil.

Notes
• At higher operating temperatures (170°-190°F) there may be some slight gassing on aluminum surfaces.
• Do not clean aluminum or zinc parts through a Mirage solution that is being used for cleaning copper, brass or bronze alloys. Always use separate tanks when cleaning these metals.

Caution: Mirage is an alkaline material. Avoid skin, eye and oral contact. Wear protective clothing, goggles and gloves. If exposed, flush thoroughly with clear water. In case of injury please contact a doctor.
Waste Disposal: In order to be completely informed on the latest regulations please contact your local authorities.