very mild, alkaline soak and ultrasonic cleaner
Altrabrite H90 is a mildly alkaline, water soluble, liquid product developed for cleaning all metal (except magnesium) without affecting their luster.
A special blend of detergents in the Altrabrite H90 will emulsify and disperse difficult soils such as lard oil, sulfurized and chlorinated oils, general shop oil
and some identification inks on aluminum alloys.
Another feature of Altrabrite H90 is its ability, when used hot with agitation, to remove buffing compound such as rouge and tripoli, from aluminum, brass,
bronze and steel.
Note: Altrabrite H90 is an excellent pre-soak cleaner, however, it will not
clean to a no water break surface. Thus Altrabrite H90 would find applications where the requirements are such, that a no water break surface is not required.
Advantages of Altrabrite H90:
• Fast dissolving - dissolves in water at any temperature.
• Safe to use - mildly alkaline - non- flammable.
• Fast acting cleaner - parts are cleaned rapidly.
• Non-corrosive and non-fuming.
Concentrate: 3 to 10% (vol)
Temperature: 150oF-200oF (65oC-93oC)
Time: 2 to 10 minutes
Equipment: Mild steel tank and heating coils
Agitation: Required for removal of buffing or
NOTE: When cleaning zinc die castings, the operating temperature of the Altrabrite H90 solution should not exceed 155oF (68oC). Operating above this temperature will result in dulling or darkening of the zinc die castings.
Even though Altrabrite H90 is a mildly alkaline product, wear protective clthing and goggles when handling the product. If exposed, flush thoroughly with clear, cold water. In case of injury, please contact a doctor.
In order to be completely informed on the latest regulations, please contact your local authorities.